357 beloit street, p.o. box 457, burlington, wi 53105-0457 u.s.a. phone 262/763-3591 fax 262/763-2881 email: nelsales@nelfc.com www.nelfc.com cmos ha-1430 series description the ha-1430 series of quartz crystal oscillators provide enable/disable 3-state cmos compatible signals for bus connected systems. supplying pin 1 of the ha-1430 units with a logic ?1" or open enables its pin 5 output. in the disabled mode, pin 5 presents a high impedance to the load. features ? wide frequency range? 68.0mhz to 145.0mhz ? user specified tolerance available ? will withstand vapor phase temperatures of 253c for 4 minutes maximum ? space-saving alternative to discrete component oscillators ? high shock resistance, to 3000g ? all metal, resistance weld, hermetically sealed package ? low jitter ? high q crystal actively tuned oscillator circuit ? power supply decoupling internal ? no internal pll avoids cascading pll problems ? low power consumption ? gold plated leads - solder dipped leads available upon request electrical connection pin connection 1 enable input 4 grd & case 5 output 8 v dd dimensions are in inches and (mm) crystal clock oscillators data sheet 9847a rev. f
357 beloit street, p.o. box 457, burlington, wi 53105-0457 u.s.a. phone 262/763-3591 fax 262/763-2881 email: nelsales@nelfc.com www.nelfc.com ha-1430 series continued cmos operating conditions and output characteristics electrical characteristics parameter symbol conditions min typical max frequency ----- ----- 68.0mhz ----- 145.0mhz duty cycle ----- @ v dd /2 40/60% ----- 60/40% logic 0 v ol @ 600a ----- ----- 0.2v logic 1 v oh @ 600a v dd -0.2v ----- ----- rise & fall time tr,tf 10-90% ----- 1 ns 3 ns tpz ----- ----- ----- ----- 5 ms jitter, rms (2) ----- ----- ----- ----- 5 psec frequency stability (1) df/f overall conditions including -100ppm ----- +100ppm voltage, calibration, temp., 10 yr aging, shock, vibration general characteristics parameter symbol conditions min typical max supply voltage v dd ----- 4.75v 5.0v 5.25v supply current i dd no load 0.0 ma ----- 80ma output current i o ----- 0.0 ma ----- 16.0 ma operating temperature t a ----- 0c ----- 70c storage temperature t s ----- -55c ----- 125c power dissipation p d ----- ----- ----- 420 mw lead temperature t l soldering, 10 sec. ----- ----- 300c load ---- ----- ----- ----- 15pf start-up time t s ----- ----- 2 ms 10 ms environmental and mechanical characteristics mechanical shock per mil-std-202, method 213, condition e thermal shock per mil-std-833, method 1011, condition a vibration 0.060" double amplitude 10 hz to 55 hz, 35g?s 55hz to 2000 hz soldering condition 300c for 10 seconds hermetic seal leak rate less than 1 x 10 -8 atm.cc/sec of helium footnotes: 1) standard frequency stability (20,25,50ppm & others available) 2) jitter performance is frequency dependent. please contact factory for full characterization. test load: rev. f crystal clock oscillators ha - a 143x - freq package code tolerance/performance ha leaded 4 pin (8 pin) 0 100ppm 0-70c sa leaded 4 pin (8 pin) smd 1 50ppm 0-70c gull wing 7 25ppm 0-70c input voltage 9 customer specific code specification a 20ppm 0-70c a 3.3v b 50ppm -40 to +85c 5v c 100ppm -40 to +85c creating a part number data sheet 9847a
|
